کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
793897 | 1466774 | 2007 | 4 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Springback behavior of brass in micro sheet forming
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
موضوعات مرتبط
مهندسی و علوم پایه
سایر رشته های مهندسی
مهندسی صنعتی و تولید
پیش نمایش صفحه اول مقاله
چکیده انگلیسی
In order to investigate the springback behavior of brass in micro sheet metal forming processes, an efficient and low cost 3 point bending experiment was conducted. Thicknesses and average grain diameters of brass 26000 1/2 Hard (H02) were controlled to achieve a range of desired T/D (thickness/average grain diameter) ratios. The relationship between springback amount and T/D ratio was studied through this experiment. It can be concluded from this study that the springback amount of brass can be expressed as a function of T/D when its thickness is less than 350 μm.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Journal of Materials Processing Technology - Volume 191, Issues 1–3, 1 August 2007, Pages 7–10
Journal: Journal of Materials Processing Technology - Volume 191, Issues 1–3, 1 August 2007, Pages 7–10
نویسندگان
Jenn-Terng Gau, Chris Principe, Miao Yu,