کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
794501 | 1466787 | 2006 | 4 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Effect of annealing temperature on the formability of Al–Mg4.5–Cu0.5 alloy sheets
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
موضوعات مرتبط
مهندسی و علوم پایه
سایر رشته های مهندسی
مهندسی صنعتی و تولید
پیش نمایش صفحه اول مقاله

چکیده انگلیسی
Formability of Al–Mg4.5–Cu0.5 alloy sheets was tested after annealing at different temperatures (220–520 °C) and water quenching. The formability (normalized limiting dome heights, LDH/R) showed only a small variation for all the samples with recrystallized structure, i.e. the LDH/R–e2 curves were within ∼13% in the range of plane strain deformation. The samples annealed at 280 °C experienced a formability level at the upper limit of the band containing all the LDH/R values. The formability rating seems to be the result of the complex interaction of the strain hardening ability and strain rate sensitivity (SRS) due to different structural features developed during different annealing conditions.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Journal of Materials Processing Technology - Volume 177, Issues 1–3, 3 July 2006, Pages 386–389
Journal: Journal of Materials Processing Technology - Volume 177, Issues 1–3, 3 July 2006, Pages 386–389
نویسندگان
E. Romhanji, M. Popovic, D. Glisic, R. Dodok, D. Jovanovic,