کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
795380 | 1466763 | 2008 | 5 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Drilling investigation of MDF (medium density fibreboard)
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
موضوعات مرتبط
مهندسی و علوم پایه
سایر رشته های مهندسی
مهندسی صنعتی و تولید
پیش نمایش صفحه اول مقاله
چکیده انگلیسی
Medium density fibreboard (MDF) is an engineering wood product. This material is appropriate for many common and industrial applications. The aim of this article is to study of the cutting parameters (cutting speed and feed rate) on delamination in MDF drilling. A plan of two MDF panels drilling experiments was performed drilling with prefixed cutting parameters. The objective was to establish correlation between cutting speed and feed rate with the delamination around the MDF hole. The delamination factor decreases with the increase of cutting speed and increases with the feed rate for both materials. The drill tests showed the different scheme of delamination for each material of coating layer (wood or melamine).
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Journal of Materials Processing Technology - Volume 203, Issues 1–3, 18 July 2008, Pages 537–541
Journal: Journal of Materials Processing Technology - Volume 203, Issues 1–3, 18 July 2008, Pages 537–541
نویسندگان
J. Paulo Davim, V.C. Clemente, Sérgio Silva,