Using contrast material techniques to determine metal flow in screw extrusion of aluminium

Screw extrusion is a new continuous solid state processing method for aluminium. In this process, small pieces of aluminium are continuously inserted into a container wherein a rotating screw pushes the material forward. The material is heated, consolidated and extruded through a die in front of the end of the screw in one single continuous process. Understanding the material flow and the pressure generating mechanism is vital for optimizing screw, container and die designs, thereby increasing capacity, material quality and process stability. Full scale experiments using a prototype extruder were chosen as the means of investigation. In this paper, it is reported on the development of a novel contrast material technique to visualize material flow in the screw channels and the extrusion chamber. Extrusion of Ø 10 mm aluminium profiles was performed using both single and double flight screws. The experimental technique provided a means for evaluating the frictional conditions between the aluminium and the surface of the extruder. Different feeding schemes were used to identify regions of high material flow rate together with dead metal zones in the screw channels and in the extrusion chamber. It is demonstrated how newly fed material interacts with and displaces material already present and how the screw pushes material into the extrusion chamber. The instantaneous extrusion velocity was measured and significant variations were detected for all feed rates. An explanatory model of the extrusion pressure generating mechanism in the extrusion chamber and the screw channel is presented linking the material flow and the consolidation process to the extrusion velocity variations.

► Contrast material is used to visualize metal flow in screw extrusion of aluminium.
► Frictional conditions and main paths of material flow are determined.
► The interaction and mixing between granulate is shown.
► An explanatory model on the extrusion pressure generating mechanism is presented.