کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
796134 | 902792 | 2009 | 6 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Effect of process parameter on the combustion temperature of laser-induced self-propagating high-temperature synthesized Al/TiC composites
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
موضوعات مرتبط
مهندسی و علوم پایه
سایر رشته های مهندسی
مهندسی صنعتی و تولید
پیش نمایش صفحه اول مقاله

چکیده انگلیسی
Ignition phenomena in self-propagating high-temperature synthesis (SHS) of Al–C–Ti system were studied. The experiments were performed in quasi-adiabatic conditions. A CO2 laser was used as external energy source and was set to the influence of Al content, laser power and particle sizes of powder on the ignition behavior. The results showed the combustion temperature depended strongly on Al content, laser power and particle sizes of Ti and C; but the particle size of Al had little effect on combustion temperature, at the same time, the effect of Al content on adiabatic combustion temperature, Tad, was calculated. According to the calculation result, adiabatic temperature decreased with the increasing of Al content.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Journal of Materials Processing Technology - Volume 209, Issue 5, 1 March 2009, Pages 2564–2569
Journal: Journal of Materials Processing Technology - Volume 209, Issue 5, 1 March 2009, Pages 2564–2569
نویسندگان
Yuxin Li, Jiandong Hu, Yuhua Liu, Zuoxing Guo, Sebastiano Tosto,