کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
7987251 | 1515274 | 2018 | 7 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
In-situ fabrication of yttria dispersed copper alloys through MA-HIP process
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
موضوعات مرتبط
مهندسی و علوم پایه
مهندسی انرژی
انرژی هسته ای و مهندسی
پیش نمایش صفحه اول مقاله
چکیده انگلیسی
Yttria (Y2O3) dispersed copper alloys were fabricated by an in-situ process combining Mechanical Alloying (MA) and Hot Isostatic Pressing (HIP). In this process, CuO powder was added into Cu(Y) alloy powders halfway during mechanical alloying (MA). To investigate the effects of Yâ¯+â¯CuO amount on the MA process and HIP process respectively, four kinds of samples (Cu-0/1/3/5wt%Y2O3) were studied in this research. For powders after MA, it was confirmed by an X-ray diffraction system (XRD) that more Yâ¯+â¯CuO addition can refine the grain size. By calculating the lattice parameters from the XRD data, and analyzing the thermal dynamics data that were obtained from the TG-DTA tests, it can be concluded that the Cu, Y were alloyed successfully at first, and then after the CuO addition, reaction between Cu(Y) and CuO occurred, extracting part of Y solute from the Cu(Y) solution. Consequently, the alloying and grain refinement effect together enhance the microhardness of the powders. After consolidation by HIP, the formation of Y2O3 particles were confirmed by XRD. The relative density and the Vickers hardness of the HIP samples increased with the increasing Y2O3 amounts, whereas the electrical conductivity showed an opposite change tendency.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Nuclear Materials and Energy - Volume 16, August 2018, Pages 168-174
Journal: Nuclear Materials and Energy - Volume 16, August 2018, Pages 168-174
نویسندگان
B. Huang, Y. Hishinuma, H. Noto, R. Kasada, N. Oono, S. Ukai, T. Muroga,