کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
7987297 | 1515275 | 2018 | 5 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Tensile properties of mechanically alloyed Zr added austenitic stainless steel
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
موضوعات مرتبط
مهندسی و علوم پایه
مهندسی انرژی
انرژی هسته ای و مهندسی
پیش نمایش صفحه اول مقاله
![عکس صفحه اول مقاله: Tensile properties of mechanically alloyed Zr added austenitic stainless steel Tensile properties of mechanically alloyed Zr added austenitic stainless steel](/preview/png/7987297.png)
چکیده انگلیسی
A mechanically alloyed austenitic stainless steel (MA304LZ) was produced from pre-alloyed SUS304L powder with a small amount of Zr addition. The yield stress of MA304LZ was more than 3 times larger than that of SUS304L or 316L, while total elongation was reduced to about one third of the conventional steels. Microstructure analysis revealed an average grain size of 0.42â¯Âµm in MA304LZ and about 34/30â¯Âµm in SUS304L/316â¯L. In MA304LZ, two types of precipitates were observed; inhomogeneously distributed fine precipitates with an average size of 6.0â¯nm and homogeneously distributed coarse precipitates (dâ¯>â¯20â¯nm) with an average size of 47â¯nm. The strengthening mechanism of MA304LZ was discussed on the bases of Hall-Petch and Orowan equations, and the strengthening of MA304LZ was attributed mostly to refined grains. The dislocation barrier strength factor, α, is estimated to be 0.277 for the Zr-rich precipitates in MA304LZ.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Nuclear Materials and Energy - Volume 15, May 2018, Pages 92-96
Journal: Nuclear Materials and Energy - Volume 15, May 2018, Pages 92-96
نویسندگان
Daniel Morrall, Jin Gao, Zhexian Zhang, Kiyohiro Yabuuchi, Akihiko Kimura, Takahiro Ishizaki, Yusaku Maruno,