Quasi static analysis of creasing and folding for three paperboards

The creasing and folding behavior of three paperboards have been studied both experimentally and numerically. Creasing and folding studies were performed on strips in both the machine direction and the cross machine direction. A finite element model that mimicked the experimental creasing and folding setup was developed, and the creasing and folding behavior could be well predicted for all three paperboards.An experimental characterization scheme consisting of three experiments was proposed, and was shown to be sufficient to predict the creasing and folding behavior. For the whole paperboard the shear strength profiles in the through thickness direction was determined with the notched shear test. Each ply was laid free by grinding, and density measurements and in-plane tension tests were performed on the bottom, middle and top plies of each paperboard. Instead of assuming uniform properties in each ply, the shear strength profiles were used to map the measured properties in the through thickness direction.Numerical simulations were performed when the ply and interface properties of the paperboards were altered to follow different shear strength profiles. This was done in order to mimic different production strategies. It was shown that the interface strengths mainly influenced the folding behavior. Whereas altered the ply properties affected the creasing force needed.

• The creasing and folding behavior of paperboards was predicted using FEM.
• Three experimental techniques were sufficient to characterize the materials.
• A mapping technique was used in the through thickness direction.
• The properties were altered to mimicking different production strategies.