کد مقاله کد نشریه سال انتشار مقاله انگلیسی نسخه تمام متن
8047867 1519222 2018 7 صفحه PDF دانلود رایگان
عنوان انگلیسی مقاله ISI
Ion implantation of the tool's rake face for machining of the Ti-6Al-4V alloy
موضوعات مرتبط
مهندسی و علوم پایه سایر رشته های مهندسی مهندسی صنعتی و تولید
پیش نمایش صفحه اول مقاله
Ion implantation of the tool's rake face for machining of the Ti-6Al-4V alloy
چکیده انگلیسی
In the paper, the results of experimental ion implantation of subsurfaces of NTP 25 multilayer coating on a carbide cutting tools inserts is presented. The implantation was performed with silicon ions, as well as with the mixture of silicon and nitrogen ions. After the implantation, the inserts characteristics were measured to determine the impact of implanted ions. It was found that the ion implantation led to the increase of the inserts hardness (up to 17.5%), decrease of the friction coefficient, and decrease of the cutting force magnitude during machining of the Ti-6Al-4 V alloy. Thus, it was proved that the ion implantation may be used as an effective method to improve the cutting tools characteristics for the machining of difficult-to-cut materials.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Journal of Manufacturing Processes - Volume 34, Part A, August 2018, Pages 274-280
نویسندگان
, , , ,