کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
8047996 | 1519225 | 2018 | 12 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Feedforward control of sheet bending based on force measurements
ترجمه فارسی عنوان
کنترل تغذیه کاغذ خمش بر اساس اندازه گیری نیرو
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
موضوعات مرتبط
مهندسی و علوم پایه
سایر رشته های مهندسی
مهندسی صنعتی و تولید
چکیده انگلیسی
The accuracy which can be reached with feedback control in industrial metal forming processes is limited by product-to-product variations in the process. These variations may be controlled with a feedforward control system. To do so, a measurement system and a process estimator are needed to measure and correct for these variations. In this work, the use of force measurements for feedforward control of a steel sheet bending process is investigated. A multi-stage demonstrator process is developed with cutting, deep drawing and bending stages and a large number of force sensors. Several relations between process forces and the product geometry are studied in an extensive analysis of measurement data from the production process. It is proposed to build a moving window process estimator using the LASSO regression method. The parameters of the regression model are updated during production based on historical data of the production line. Several simulation runs are performed to estimate the effect of feedforward control on the process accuracy. These simulation runs are based on measurements from the real production line and minor assumptions. The proposed approach leads to an estimated decrease of 24% in the root mean square error of the final angle with respect to a simulation run with feedback control only.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Journal of Manufacturing Processes - Volume 31, January 2018, Pages 260-272
Journal: Journal of Manufacturing Processes - Volume 31, January 2018, Pages 260-272
نویسندگان
Jos Havinga, Ton van den Boogaard, Franz Dallinger, Pavel Hora,