کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
8048171 | 1519238 | 2015 | 23 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Effect of filler wires and direct ageing on the microstructure and mechanical properties in the multi-pass welding of Inconel 718
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
موضوعات مرتبط
مهندسی و علوم پایه
سایر رشته های مهندسی
مهندسی صنعتی و تولید
پیش نمایش صفحه اول مقاله
![عکس صفحه اول مقاله: Effect of filler wires and direct ageing on the microstructure and mechanical properties in the multi-pass welding of Inconel 718 Effect of filler wires and direct ageing on the microstructure and mechanical properties in the multi-pass welding of Inconel 718](/preview/png/8048171.png)
چکیده انگلیسی
This paper investigates the weldability, microstructure and mechanical properties of 5 mm thick Inconel 718 plates obtained by pulsed current gas tungsten arc welding (PCGTAW) using ERNiCu-7, ERNiCrCoMo-1 and ERNiCr-3 fillers. Post weld heat treatment (PWHT) was also carried out at 720 °C/8 h/furnace cooling followed by 620 °C/8 h/air cooling on the weldments. A comparative evaluation based on the microstructure features and mechanical properties of both the as-welded and aged samples were studied. Further this study addressed the combined effect of filler wires and post weld heat treatment on the metallurgical and mechanical properties of the weldments. The studies showed the improvement in tensile strength and drop in impact toughness for all the weldments after direct ageing heat treatment.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Journal of Manufacturing Processes - Volume 18, April 2015, Pages 23-45
Journal: Journal of Manufacturing Processes - Volume 18, April 2015, Pages 23-45
نویسندگان
K. Devendranath Ramkumar, R. Jagat Sai, V. Santhosh Reddy, Sridhar Gundla, T. Harsha Mohan, Vimal Saxena, N. Arivazhagan,