کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
808599 | 905767 | 2014 | 18996 صفحه PDF | دانلود رایگان |
Residual stress evolution regularity in thermal barrier ceramic coatings (TBCs) under different cycles of thermal shock loading of 1100°C was investigated by the microscopic digital image correlation (DIC) and micro-Raman spectroscopy, respectively. The obtained results showed that, as the cycle number of the thermal shock loading increases, the evolution of the residual stress undergoes three distinct stages: a sharp increase, a gradual change, and a reduction. The extension stress near the TBC surface is fast transformed to compressive one through just one thermal cycle. After different thermal shock cycles with peak temperature of 1100°C, phase transformation in TBC does not happen, whereas the generation, development, evolution of the thermally grown oxide (TGO) layer and micro-cracks are the main reasons causing the evolution regularity of the residual stress.
Journal: Theoretical and Applied Mechanics Letters - Volume 4, Issue 2, 2014, Article 021009