کد مقاله کد نشریه سال انتشار مقاله انگلیسی نسخه تمام متن
8118469 1522345 2014 15 صفحه PDF دانلود رایگان
عنوان انگلیسی مقاله ISI
Biomass gasification gas cleaning for downstream applications: A comparative critical review
ترجمه فارسی عنوان
تصفیه گاز گازسوز سازی زیست توده برای برنامه های پایین دست: یک بررسی انتقادی مقدماتی
کلمات کلیدی
گازسیون زیست توده، تمیز کردن گاز، اصلاح تار، فیلتر کاتالیست قدرت زیست توده،
ترجمه چکیده
زیست توده تنها منبع زمین است که می تواند انرژی خورشیدی را در پیوند شیمیایی در طی رشد آن ذخیره کند. این انرژی ذخیره شده را می توان با استفاده از تبدیل ترمو شیمیایی زیست توده مورد استفاده قرار داد. گازسیون یکی از فن آوری های تبدیل شیمیایی ترمو شیمیایی است که بیوماس را به گازهای قابل احتراق تبدیل می کند که اغلب به عنوان تولید کننده گاز نامیده می شود. اجزای اصلی این گاز عبارتند از هیدروژن، منوکسید کربن و متان. بسته به خلوص، این گاز می تواند در کوره برای تولید گرما و موتور احتراق داخلی و سلول سوختی برای تولید برق استفاده شود یا از طریق روش سیکشن فیشر-تروپش به سوخت های هیدروکربن مایع تبدیل می شود. با وجود استفاده مجدد از گازهای گازسوز سازی زیست توده، به دلیل برخی از چالش های شدید فنی، هنوز هم در حال توسعه است. بعضی از مواد افزودنی مانند قیر، مواد ذرات و گازهای سمی شامل آمونیاک، اسید هیدروکلریک و گازهای سولفور که ناگزیر در طول گازسیون تولید می شوند، در برنامه های کاربردی پایین دست ایجاد می شوند. بنابراین، تمیز کردن گاز تولید کننده قبل از استفاده ضروری است. با این حال، فیلتراسیون فیزیکی معمولی یک فرایند فنی و قابل اطمینان برای تمیز کردن گاز گازسیون نیست. استفاده از کاتالیزور برای تمیز کردن گاز داغ یکی از محبوب ترین فن آوری های تمیز کردن گاز است. بستر کاتالیست می تواند از یک سو مولکول های تار را به گاز تبدیل کند و از سوی دیگر گازهای سمی و مواد مغذی را از بین ببرد یا جذب کند تا تولید گازهای پاک شود. با این حال، معیارهای متعددی باید برای انتخاب کاتالیزور مناسب برای استفاده تجاری استفاده شود. در این بررسی، مزایا و معایب روش های مختلف تمیز کردن گاز به صورت انتقادی مورد بحث قرار گرفته و نتیجه گیری شده است که تمیز کردن گاز داغ کاتالیزوری با کاتالیزور بسیار کارآمد، گزینه های مناسب برای تولید بزرگ تولید گاز پاک است.
موضوعات مرتبط
مهندسی و علوم پایه مهندسی انرژی انرژی های تجدید پذیر، توسعه پایدار و محیط زیست
چکیده انگلیسی
Biomass is the only source on earth that can store solar energy in the chemical bond during its growth. This stored energy can be utilized by means of thermochemical conversion of biomass. Gasification is one of the promising thermochemical conversion technologies, which converts biomass to burnable gases, often termed as producer gas. Major components of this gas are hydrogen, carbon monoxide and methane. Depending on the purity, this gas can be used in the furnace for heat generation and in the internal combustion engine and fuel cell for power generation or it can be converted to liquid hydrocarbon fuels and chemicals via the Fischer-Tropsch synthesis method. Despite numerous applications of the biomass gasification gas, it is still under developing stage due to some severe technological challenges. Impurities such as tar, particulate matters and poisonous gases including ammonia, hydrochloric acid and sulfur gases, which are unavoidably produced during gasification, create severe problems in downstream applications. Therefore, the cleaning of producer gas is essential before being utilized. However, the conventional physical filtration is not a technically and environmentally viable process for gasification gas cleaning. The utilization of catalyst for hot gas cleaning is one of the most popular technologies for gas cleaning. The catalyst bed can reform tar molecules to gas on the one hand and destroy or adsorb poisonous gases and particulates on the other hand, so as to produce clean gas. However, numerous criteria need to be considered to select the suitable catalyst for commercial use. In this review, the advantages and disadvantages of different gas cleaning methods are critically discussed and concluded that the catalytic hot gas cleaning with highly efficient catalyst is the most viable options for large-scale production of clean producer gas.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Renewable and Sustainable Energy Reviews - Volume 40, December 2014, Pages 118-132
نویسندگان
,