کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
8130643 | 1523213 | 2015 | 8 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
A two-step hybrid technique for accurately localizing acoustic source in anisotropic structures without knowing their material properties
ترجمه فارسی عنوان
یک روش ترکیبی دو مرحلهای برای دقیق قرار دادن منبع صوتی در ساختارهای بدون انحنای بدون دانستن خواص مواد
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
محلی سازی منبع آکوستیک، انتشار آکوستیک، بشقاب بیضوی،
ترجمه چکیده
تکنیک های محلی سازی منبع صوتی عموما خطوط انتقال امواج از منبع صوتی به سنسور را در نظر می گیرند. با این حال، به خوبی شناخته شده است که در صفحات غیر انعکاسی انرژی آکوستیک همیشه در خطوط مستقیم پخش نمی شود. حتی برای صفحات ایزوتروپیک حاوی حفره یا ورودی میان منبع صوتی و سنسور، پیشبرد انتشار خط مستقیم نقض شده است. در چنین مواردی تنها گزینه هایی که در منبع محلی محلی استفاده می شود، استفاده از سیستم های سنسور نسبتا گران توزیع شده یا پیروی از تکنیک های چرخش زمان است که بر اساس عملکرد پاسخ های ضربه ای است که کارآفرینی و محاسباتی است. در این مقاله یک روش ترکیبی دو مرحله ای برای پیش بینی منبع صوتی در صفحات آنیزوتروپیک پیشنهاد شده است. در مرحله اول تصور می شد که امواج در امتداد خطوط مستقیم از منبع صوتی به سنسور پخش می شوند. منبع با این فرض ساده ساده شده است. سپس این اولین پیش بینی در مرحله دوم با حل یک مشکل بهینه سازی بهبود یافت. نتایج تجربی نشان داد که گام دوم همیشه تخمین ها را نسبت به محل منبع واقعی نقل مکان کرد. بنابراین همیشه خطای پیش بینی را صرف نظر از اینکه آیا پیش بینی نهایی با محل منبع واقعی همخوانی دارد یا خیر، همیشه خطای پیش بینی را کاهش داد.
موضوعات مرتبط
مهندسی و علوم پایه
فیزیک و نجوم
آکوستیک و فرا صوت
چکیده انگلیسی
Acoustic source localization techniques generally assume straight line propagation of waves from the acoustic source to the sensor. However, it is well-known that in anisotropic plates the acoustic energy does not always propagate in straight lines. Even for isotropic plates containing a cavity or an inclusion between the acoustic source and the sensor the straight line propagation assumption is violated. In such cases only options available in localizing acoustic source is to use relatively expensive distributed sensor systems, or to follow time reversal techniques based on the impulse response functions which is labor intensive and computationally demanding. A two-step hybrid technique is proposed in this paper for predicting acoustic source in anisotropic plates. During the first step it was assumed that the waves propagated along straight lines from the acoustic source to the sensor. The source was localized with this simplifying assumption. Then this first prediction was improved in the second step by solving an optimization problem. Experimental results showed that the second step always moved the estimates towards the actual source location. Thus it always reduced the prediction error irrespective of whether the final prediction coincided with the actual source location or not.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Ultrasonics - Volume 56, February 2015, Pages 271-278
Journal: Ultrasonics - Volume 56, February 2015, Pages 271-278
نویسندگان
T. Kundu, X. Yang, H. Nakatani, N. Takeda,