Evaluation of road failure vulnerability section through integrated geophysical and geotechnical studies

In order to investigate the competence of the proposed road for pavement stability, geotechnical and geophysical investigations involving Land Magnetic, Very Low Frequency Electromagnetic (VLF-EM) and Electrical Resistivity methods were carried out along Akure-Ipinsa road Southwestern Nigeria. The magnetic profile was qualitatively and quantitatively interpreted to produce geomagnetic section that provides information on the basement topography and structural disposition beneath the proposed road. Similarly, the VLF-EM profile was equally interpreted to provide information on the possible occurrence of linear features beneath the study area. These linear features pose a potential risk to the proposed road as they are capable of undermining the stability of the pavement structure. The geoelectric parameters obtained from the quantitative interpretation of the VES data were used to generate geoelectric section. The geoelectric section generated shows that the study area was underlain by four geoelectric layers namely the topsoil, the weathered layer, the partly weathered/fractured basement and the fresh basement. The major part of the topsoil, which constitutes the subgrade, is characterized by relatively low resistivity values (<100 Ωm) suggestive of weak zones that are capable of undermining the stability of the proposed road. This therefore suggests that the layer is composed of incompetent materials that are unsuitable for engineering structures. Furthermore, fractured basement was also delineated beneath some portion of the proposed road. Since fracture is a weak zone, its presence can facilitate failure of the proposed road especially when it is occurring at shallow depth. The geotechnical results reveal that most of the investigated soil samples are clayey in nature. Integration of the results demonstrates that there is a good correlation between geophysical results and the geotechnical results. Furthermore, a vulnerability section that divided the road segments into three zones based on the degree of vulnerability was produced. These zones were high, moderate and low vulnerability zones. It is estimated that about 60% of the road segments constitutes moderate degree of vulnerability while 30% and 10% of the segments respectively constitute high and low degree of vulnerability.