کد مقاله کد نشریه سال انتشار مقاله انگلیسی نسخه تمام متن
814554 1469221 2016 5 صفحه PDF دانلود رایگان
عنوان انگلیسی مقاله ISI
Surface Roughness and Hydrophilicity of Titanium after Anodic Oxidation
ترجمه فارسی عنوان
زبری سطح و آب‌دوستی تیتانیوم پس از اکسیداسیون آندی
کلمات کلیدی
موضوعات مرتبط
مهندسی و علوم پایه سایر رشته های مهندسی مکانیک مواد
چکیده انگلیسی

Anodic oxidation was applied to prepare the nanostructured titanium surface with different roughnesses and hydrophilicities. The morphology was characterized by scanning electron microscopy (SEM). The surface roughness was tested by atomic force microscopy (AFM), and the hydrophilicity was assessed from the contact angle between the deionized water and sample surface at room temperature. The results show that surface morphologies change remarkably with applied voltage and oxidation time during anodic oxidation. Under optimized oxidation conditions, well-ordered nanotube arrays were fabricated on the Ti surface. Roughness values increase with increase of the oxidation time, ranging from several dozen to several hundred nanometers, while the influence of voltage on surface roughness is not obvious. The hydrophilicity increases initially with the increase of oxidation time, but then decrease. The variations of surface morphology, roughness and hydrophilicity are correlated to the reactions occurring during the anodic oxidation.

ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Rare Metal Materials and Engineering - Volume 45, Issue 4, April 2016, Pages 858–862
نویسندگان
, , , , , , ,