Resin infusion analysis of nanoclay filled glass fiber laminates

This paper focuses on the resin flow characteristics of nanoclay filled glass fiber laminates processed by Vacuum Assisted Resin Infusion Molding (VARIM). Laminates with varying quantities of nanoclays (0-5 wt.%) were prepared and the effect of these nanoclays on the epoxy resin flow characteristics was studied. It was found that the flow rate of resin continuously decreased as nanoclay content continuously increased. The reduction in the flow rate was attributed to the rate of change of curing and the subsequent change in viscosity of the nanoclay filled resin. Analysis of infusion process by Darcy's law show that the permeability of the fiber decreased in the nanoclay filled resin system. Nanoclay filled laminates show improved static and dynamic mechanical properties than that of unfilled resin composites.