Load and resistance factor design of fiber reinforced polymer composite bridge deck

The majority of our bridges were constructed with conventional civil engineering materials of steel and concrete in a typical slab on girder or truss construction. Reinforced concrete bridge decks have approximately 40% life of the steel girders that support these structures. In order to support the use of alternative materials to replace deteriorating concrete decks, this paper outlines the Load and Resistance Factor Design (LRFD) of Fiber Reinforced Polymer composite (FRP) panel highway bridge deck. The deck would be of a sandwich construction where 152.4 mm × 152.4 mm × 9.5 mm square pultruded glass FRP (GFRP) tubes are joined and sandwiched between two 9.5 mm GFRP plates. The deck would be designed by Allowable Stress Design (ASD) and LRFD to support AASHTO design truckload HL-93. There are currently no US standards and specifications for the design of FRP pultruded shapes including a deck panel therefore international codes and references related to FRP profiles will be examined and AASHTO-LRFD specifications will be used as the basis for the final design. Overall, years of research and laboratory and field tests have proven FRP decks to be a viable alternative to conventional concrete deck. Therefore, conceptualizing the design of FRP bridge decks using basic structural analysis and mechanics would increase awareness and engineering confidence in the use of this innovative material.