کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
818890 | 906538 | 2013 | 9 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
On the properties of composites based on sintered bronze with alumina additives
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
موضوعات مرتبط
مهندسی و علوم پایه
سایر رشته های مهندسی
مهندسی (عمومی)
پیش نمایش صفحه اول مقاله
چکیده انگلیسی
This paper describes the changes in some structural, mechanical and tribological properties of an MMC based on sintered Cu–Sn bronze reinforced by an alumina additive. If a correct percentage of the additive is added, the values of the MMC bending strength and strength limit in compression do not change, but a reduction of the friction coefficient and the wear rate is observed in the case of both the concentrated and distributed contact of the MMC with C45 steel is observed. SEM analysis indicates events of abrasive and adhesive wear of friction surfaces of the MMC and C45 steel and also mass transfer.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Composites Part B: Engineering - Volume 45, Issue 1, February 2013, Pages 239–247
Journal: Composites Part B: Engineering - Volume 45, Issue 1, February 2013, Pages 239–247
نویسندگان
Larisa Dyachkova, Eugene E. Feldshtein,