کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
819310 | 906551 | 2010 | 10 صفحه PDF | دانلود رایگان |
![عکس صفحه اول مقاله: Comparison of tensile and compressive characteristics of vinyl ester/glass microballoon syntactic foams Comparison of tensile and compressive characteristics of vinyl ester/glass microballoon syntactic foams](/preview/png/819310.png)
The present study is focused on the synthesis and characterization of vinyl ester/glass microballoon syntactic foams. Tensile and compressive properties of vinyl ester matrix syntactic foams are characterized. Results show that the compressive strength and moduli of several syntactic foam compositions are comparable to those of the neat matrix resin. Due to the lower density of syntactic foams, the specific compressive properties of all compositions are higher than those of the neat resin. Similar trends are observed in the tensile properties. Mechanical properties of vinyl ester matrix syntactic foams are compared to well-documented mechanical properties of epoxy matrix systems. The comparison shows that low cost vinyl ester resins, which are extensively used in marine applications, can result in syntactic foams with comparable performance to epoxy matrix systems. In addition, tensile modulus is found to be 15–30% higher than the compressive modulus for all syntactic foam compositions. This difference is related to the possibility of particle fracture in the stress range where modulus is calculated in the compressive stress–strain curves.
Journal: Composites Part B: Engineering - Volume 41, Issue 3, April 2010, Pages 236–245