Study on the anisotropic photonic band gaps in three-dimensional tunable photonic crystals containing the epsilon-negative materials and uniaxial materials

In this paper, the properties of anisotropic photonic band gaps (PBGs) for three-dimensional (3D) photonic crystals (PCs) composed of the anisotropic positive-index materials (the uniaxial materials) and the epsilon-negative (ENG) materials with body-centered-cubic (bcc) lattices are theoretically studied by a modified plane wave expansion (PWE) method, which are the uniaxial materials spheres inserted in the epsilon-negative materials background. The anisotropic photonic band gaps (PBGs) and one flatbands region can be achieved in first irreducible Brillouin zone. The influences of the ordinary-refractive index, extraordinary-refractive index, filling factor, the electronic plasma frequency, the dielectric constant of ENG materials and the damping factor on the properties of anisotropic PBGs for such 3D PCs are studied in detail, respectively, and some corresponding physical explanations are also given. The numerical results show that the anisotropy can open partial band gaps in such 3D PCs with bcc lattices composed of the ENG materials and uniaxial materials, and the complete PBGs can be obtained compared to the conventional 3D PCs containing the isotropic materials. The calculated results also show that the anisotropic PBGs can be manipulated by the parameters as mentioned above except for the damping factor. Introducing the uniaxial materials into 3D PCs containing the ENG materials can obtain the larger complete PBGs as such 3D PCs with high symmetry, and also provides a way to design the tunable devices.