کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
8208244 | 1531899 | 2018 | 6 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
The fatigue damage evaluation of gear in sugarcane presser using higher order ultrasonic nonlinear coefficients
ترجمه فارسی عنوان
ارزیابی آسیب خستگی دنده در مطب دندان شیرین با استفاده از ضریب غیر خطی اولتراسونیک بالاتر
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
ارزیابی آسیب خستگی، ضریب غیر خطی اولتراسونیک بالاتر، تشخیص دنده، اولتراسونیک غیرخطی
ترجمه چکیده
آسیب خستگی دنده در مطب دندان شیرین یکی از شایع ترین خسارات است که در کارخانه شکر بسیار دشوار است. روش اولتراسونیک غیرخطی برای ارزیابی آسیب خستگی دنده در این مقاله استفاده شده است. روش اختلال برای حل معادله موج غیر خطی اعمال می شود، رابطه بین ضریب غیرخطی نسبی و هارمونیک های بالاتر مورد تجزیه و تحلیل قرار گرفته است که ضرایب غیرخطی نسبی نسبی دوم و سوم برای ارزیابی آسیب خستگی استفاده می شود. دنده در مطب دندان شیرین پس از سه سال خدمات اهداف تحقیق است، که در آن 32 نقطه در ریشه دندان و 16 نقطه در مرکز دندان انجام آزمایش اولتراسونیک غیرخطی است. نتایج تجربی نشان می دهد که نقاط تشخیص مختلف دارای درجه آسیب های مختلف هستند و درجه آسیب خستگی دندان های شماره 14 و 15 جدی تر از دندان های دیگر است. در حالی که برای دندان مشابه، درجه آسیب ریشه دندان بسیار بیشتر از مرکز دندان است. بنابراین، ضرایب غیرخطی نسبی اندازه گیری شده می تواند برای ارزیابی آسیب خستگی دنده استفاده شود، که روش عملی برای ارزیابی آسیب داخلی در دنده در کارخانه قند را فراهم می کند.
موضوعات مرتبط
مهندسی و علوم پایه
فیزیک و نجوم
فیزیک و نجوم (عمومی)
چکیده انگلیسی
The fatigue damage of gear in sugarcane presser is one of the most common damages, which is very difficult to detect in sugar factory. The nonlinear ultrasonic technique is used to evaluate the fatigue damage of gear in this paper. The perturbation method is applied to solve the nonlinear wave equation, the relationship between relative nonlinear coefficient and higher harmonics is analyzed which the second and third order relative nonlinear coefficients are applied to evaluate the fatigue damage. The gear in sugarcane presser after three years service is the research objective, which thirty-two points at tooth root and sixteen points at tooth centre are conducted the nonlinear ultrasonic experiment. Experimental results indicate different detection points have different damage degree, and the fatigue damage degree of tooth No. 14 and 15 are more serious than other teeth. While for the same tooth, the damage degree of tooth root is much severer than the tooth centre. Therefore, the measured relative nonlinear coefficients could be applied to evaluate the fatigue damage of gear, which provides the practical method for internal damage evaluation of gear in sugar factory.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Results in Physics - Volume 10, September 2018, Pages 601-606
Journal: Results in Physics - Volume 10, September 2018, Pages 601-606
نویسندگان
Hanying Mao, Yuhua Zhang, Hanling Mao, Zhenfeng Huang, Jianwen Fan, Xinxin Li, Xiaoping Li,