Low velocity impact response of 3D angle-interlock Kevlar/basalt reinforced polypropylene composites

• Low velocity impact response of 3D angle-interlock polypropylene composites.
• 3D hybrid composites exhibit the best energy absorption capability.
• Hybridization increases the impact response of the laminates maintaining low density.
• Simulation of impact response of 3D composites using linear orthotropic damage model.

Experimental and numerical investigations are carried out to determine the low velocity impact (LVI) response of three different polypropylene (PP) composites. Three dimensional (3D) angle-interlock fabrics with Kevlar, basalt and a hybrid combination of both are produced. 3D composites are manufactured with these three fabrics using vacuum-assisted compression molding process with PP resin. LVI tests are conducted using a drop-weight impact equipment at the energy level of 240 J. The LVI response of the three 3D-PP composites is compared in terms of peak force, energy absorption and damage modes. The experimental results indicate that the basalt 3D composites showed 6.62–13.73% higher peak force and H3D composites absorbed 7.67-48.49% more energy than the remaining composites. Results indicate that there is a considerable enhancement in the energy absorbing capability of hybrid composites as compared to Kevlar/PP and basalt/PP composites. Numerical simulations are carried out using the commercial finite element (FE) code ABAQUS/Explicit. A user-defined material subroutine (VUMAT) based on Chang-Chang linear orthotropic damage model, is implemented into the FE code. Good agreement between experimental and numerical simulations is achieved in terms of impact response characteristics.

Figure optionsDownload as PowerPoint slide