کد مقاله کد نشریه سال انتشار مقاله انگلیسی نسخه تمام متن
828390 1470300 2015 9 صفحه PDF دانلود رایگان
عنوان انگلیسی مقاله ISI
Shear coefficient determination in linear friction welding of aluminum alloys
ترجمه فارسی عنوان
تعیین ضریب برشی در جوش خطی اصطکاکی آلومینیوم
موضوعات مرتبط
مهندسی و علوم پایه سایر رشته های مهندسی مهندسی (عمومی)
چکیده انگلیسی


• Temperature dependent friction coefficient m was determined.
• m varies in a limited range with varying pressure and oscillation frequency.
• m value increases with temperature till about 340 °C.
• Constant m = 1 is obtained for T > 340 °C indicating sticking conditions and adhesion of the interface.

In the present study, a combined experimental and numerical investigation on Linear Friction Welding (LFW) of AA2011-T3 aluminum alloy was carried out in order to find the temperature dependent shear coefficient to be used in a 3D numerical model of the process. Torque, oscillation frequency and pressure were acquired in order to calculate the shear stress at the interface. A numerical thermal model was used to calculate the temperature at the interface between the specimens starting from experimental temperatures acquired through a thermocouple embedded in the LFW specimens. Finally, the calculated shear coefficient was used to model the contact between the two specimens in a dedicated 3D, Lagrangian, thermo-mechanically coupled rigid-viscoplastic numerical model of the LFW process. A narrow range of variation of the shear factor vs temperature curve was found with varying LFW process parameters and good agreement was obtained for the temperature prediction of the 3D model of the process.

Figure optionsDownload as PowerPoint slide

ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Materials & Design - Volume 82, 5 October 2015, Pages 238–246
نویسندگان
, , , ,