Extraction and preparation of bamboo fibre-reinforced composites

• Lignin has a majority effect on the mechanical properties of the extracted fibres.
• The lignin can be highly removed by both chemical and steam explosion methods.
• It is essential to control and reduce the moisture content of bamboo fibres.
• Moisture content, temperature and the type of matrix are important factors.

Natural plant fibre composites have been developed for the production of a variety of industrial products, with benefits including biodegradability and environmental protection. Bamboo fibre materials have attracted broad attention as reinforcement polymer composites due to their environmental sustainability, mechanical properties, and recyclability, and they can be compared with glass fibres. This review classifies and describes the various procedures that have been developed to extract fibres from raw bamboo culm. There are three main types of procedures: mechanical, chemical and combined mechanical and chemical extraction. Composite preparation from extracted bamboo fibres and various thermal analysis methods are also classified and analysed. Many parameters affect the mechanical properties and composite characteristics of bamboo fibres and bamboo composites, including fibre extraction methods, fibre length, fibre size, resin application, temperature, moisture content and composite preparation techniques. Mechanical extraction methods are more eco-friendly than chemical methods, and steam explosion and chemical methods significantly affect the microstructure of bamboo fibres. The development of bamboo fibre-reinforced composites and interfacial adhesion fabrication techniques must consider the type of matrix, the microstructure of bamboo and fibre extraction methods.