Experimental and numerical assessment of mechanical properties of welded tubes for hydroforming

• An efficient method was proposed to obtain plastic behavior of welded tubes.
• Constitutive parameters were obtained by tensile tests rule of mixtures and microhardness.
• Flow stress relationships were determined for the weld line.
• Simulation results were found to be satisfactory with the experimental ones.

The identification of welded tubes properties considering the weld bead and Heat Affected Zone (HAZ) is important for reliable and accurate finite element simulation of tubular plastic forming processes such as tube hydroforming and rotary draw bending processes. Therefore, a simplified method is proposed to extract the weld bead and HAZ properties. Full size standard tensile specimens cut from the welded tube and comprising the weld parallel to the load direction are extended to failure. Mechanical properties obtained from uniaxial tensile test are correlated with the microhardness data measured across the welded specimen and by using the rule of mixtures; the constitutive model parameters of weld bead and HAZ regions are identified. Accuracy of the proposed method is assessed by comparing finite element simulation predictions to experimental measurements obtained from two mechanical tests: the first one is the uniaxial tensile test performed on specimens comprising the weld line perpendicular to the loading direction and the second test is the free bulge hydroforming test achieved on seamed tubular samples. This investigation has shown that the presented method is practical in use and sufficiently accurate to extract the weld metal properties of seamed tubes.