In situ joining of titanium to SiC/Al composites by low pressure infiltration

A method of in situ joining of titanium to SiC/Al composites by low pressure infiltration was proposed. The effect of infiltration temperature on microstructure and bending strength of in situ joining composites was investigated and the best infiltration temperature was confirmed to be 710 °C. The interfacial region of SiC/Al/Ti composites was consisted of Ti substrate, Al–Ti interfacial layer, Al layer and SiC/Al composite. The bending strength of SiC/Al composites kept nearly constant as the infiltration temperature changed while that of SiC/Al/Ti composites was influenced significantly by the infiltration temperature. The fracture occurred at the Al–Ti and Al–SiC/Al interfaces alternately as infiltrated at 670 °C. But as the infiltration temperature was increased to 710 °C, the fracture occurred only at the Al–SiC/Al interface which shows a great interfacial bonding at the Al–Ti interface. The formation of Al–Ti brittle intermetallics and the effect of crystallization and grain coarsening are two possible reasons which lead to the decrease of bending strength when the infiltration temperatures were increased from 710 °C to 730 °C.

► A method of in situ joining of titanium to SiC/Al composites by low pressure infiltration was proposed.
► The best infiltration temperature was confirmed to be 710 °C.
► The bending strength of SiC/Al/Ti composites was influenced significantly by the infiltration temperature.
► The thickness of the Al–Ti diffusion layer is about 10 μm at 710 °C.