کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
830065 | 1470350 | 2013 | 9 صفحه PDF | دانلود رایگان |
An algorithm is proposed for springback compensation and modification for doubly curved plate, and it is established by a combination method of theoretical analysis, numerical simulation and forming experiment. Calculation equation for curvature after springback compensation is obtained based on an elastic-perfectly plastic biaxial bending model. Interpolation processing and Bezier surface blending methods are used to describe the shape of die surface after springback compensation. Based on the shape of die surface, numerical simulations and forming experiments are carried out for multi-point forming process. Simultaneously, Comparative simulations and experiments of multi-point forming process without springback modification are conducted. Simulation and experimental results show that the compensation method may effectively control the errors caused by springback in multi-point forming of doubly curved plate.
► Springback compensation algorithm based on biaxial bending model is established.
► Bezier surface blending methods are used to construct the curved surface.
► Simulations and experiments verify the accuracy of the theoretical calculation.
► The results with and without springback modification are compared and analyzed.
► The compensation method could control the errors caused by springback effectively.
Journal: Materials & Design - Volume 47, May 2013, Pages 377–385