Dense and smooth amorphous films of multicomponent FeCoNiCuVZrAl high-entropy alloy deposited by direct current magnetron sputtering

The multicomponent amorphous nitride films of FeCoNiCuVZrAl high-entropy alloy were deposited by direct current magnetron sputtering in the mixture atmosphere of Ar and N2. The systematical investigations demonstrate that the chemical composition, microstructure, and mechanical properties of the amorphous films intimately rely on the concentration of N2 in the atmosphere mixture. When N2 flow ratio increases from 0% to 50%, the thickness of the films decreases, whereas the roughness firstly decreases and then increases. At the N2 flow ratio of 30%, a perfect dense and smooth amorphous nitride film could be achieved. While the hardness and Young’s modulus of the film reach the maximum values of 12 and 166 GPa, respectively.

► We prepare a perfect dense and smooth amorphous nitride high entropy film.
► The formation mechanism has been discussed based on thermodynamic theory.
► The hardness and Young’s modulus of the film can reach to 12 and 166 GPa.
► We discuss the effects of N2 flow ratios.