کد مقاله کد نشریه سال انتشار مقاله انگلیسی نسخه تمام متن
830249 1470352 2013 6 صفحه PDF دانلود رایگان
عنوان انگلیسی مقاله ISI
Effect of tool pin profile on microstructure and mechanical properties of friction stir welded pure copper joints
موضوعات مرتبط
مهندسی و علوم پایه سایر رشته های مهندسی مهندسی (عمومی)
پیش نمایش صفحه اول مقاله
Effect of tool pin profile on microstructure and mechanical properties of friction stir welded pure copper joints
چکیده انگلیسی

In the present study, the effect of tool pin profile on microstructure and mechanical properties of friction stir welded pure copper joints were investigated. Two different tools with threaded cylindrical and square pin profiles were used to fabricate the joints at constant rotation rate of 600 rpm and traverse speed of 75 mm/min. Four K-type thermocouples were used to record the temperature histories of samples during FSW. Microstructure features of the joints were characterized by optical microscopy and the obtained images were quantified using image analysis technique. Tension test and Vickers hardness measurements were also performed to characterize the mechanical properties of the joints. Obtained results showed that sample welded using square pin profile had finer recrystallized grain structure and higher mechanical properties relative to sample welded by threaded cylindrical one. These results were attributed to higher eccentricity of the square pin profile and its pulsation effect which led to higher degree of plastic deformation and higher heat input into the joints.


► Square and threaded cylindrical pin profiles were used to FSW of pure copper joints.
► Square pin led to higher plastic deformation and peak temperature of thermal cycle.
► Sample welded using square pin profile showed finer recrystallized grain structure.
► Sample welded using square pin profile showed higher mechanical properties.
► Results were attributed to higher eccentricity and pulsation effect of square pin.

ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Materials & Design - Volume 45, March 2013, Pages 265–270
نویسندگان
, , ,