کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
830482 | 1470355 | 2012 | 6 صفحه PDF | دانلود رایگان |
![عکس صفحه اول مقاله: Date palm wood flour/glass fibre reinforced hybrid composites of recycled polypropylene: Mechanical and thermal properties Date palm wood flour/glass fibre reinforced hybrid composites of recycled polypropylene: Mechanical and thermal properties](/preview/png/830482.png)
Recycled polypropylene (RPP) based hybrid composites of date palm wood flour/glass fibre were prepared by different weight ratios of the two reinforcements. Mixing process was carried out in an extruder and samples were prepared by injection molding machine. Recycled PP properties were improved by reinforcing it by wood flour. The tensile strength and Young’s modulus of wood flour reinforced RPP increased further by adding glass fibre. Glass fibre reinforced composites showed higher hardness than other composites. Morphological studies indicated that glass fiber has good adhesion with recycled PP supporting the improvement of the mechanical properties of hybrid composites with glass fiber addition. Addition of as little 5 wt% glass fibre to wood flour reinforced RPP increases the tensile strength by about 18% relative to the wood flour reinforcement alone. An increase in wood particle content in the PP resulted in a decrease in the degree of crystallinity of the polymer. The tensile strength of the composites increased with an increase in the percentage of crystallinity when adding the glass fibre. The improvement in the mechanical properties with the increase in crystallinity percentage (and with the decrease of the lamellar thicknesses) can be attributed to the constrained region between the lamellae because the agglomeration is absent in this case.
► Wood flour/glass fibre recycled PP composite has good thermomechanical properties.
► Addition of 5 wt% GF increases tensile strength by 20% relative to wood flour alone.
► Crystallinity% increases with adding the GF.
► Lamellar thickness decreased due to constrained region between lamellae.
Journal: Materials & Design - Volume 42, December 2012, Pages 289–294