کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
830491 | 1470355 | 2012 | 6 صفحه PDF | دانلود رایگان |
The grain refinement effect and the ageing behaviour of Al–0.5 wt.% Sc, Al–0.7 wt.% Sc, and Al–1 wt.% Sc alloys are studied on the basis of optic microscopy (OM), scanning electron microscopy (SEM), X-ray diffraction (XRD) observations and hardness measurements. In Al–Sc alloys the higher grain refinement is observed for Sc contents greater than 0.5 wt.% accompanied by a notorious morphology modification, from coarse columnar grains to a fine perfect equiaxed structure. The as cast structures are characterised by a rich supersaturated solid solution in Sc, that promotes a great age hardening response at 250 °C and 300 °C. The age hardening curves also demonstrate a low overageing kinetics for all the alloys. Although the higher Sc content in solid solution for the alloys with 0.7 and 1 wt.% Sc, the age hardening response of all the Al–Sc alloys remains similar. The direct age hardening response of the as cast Al–0.5 wt.% Sc is shown to be greater than the solutionised and age hardened alloy.
► The Sc effect on the microstructure and ageing behaviour of Al–Sc alloys is studied.
► Cast into copper mould allows the elimination of solution heat treatment.
► Directly aged as cast alloys exhibits higher hardness and precipitation kinetics.
► Sc addition and optimised ageing result in an increase in Al–Sc mechanical properties.
Journal: Materials & Design - Volume 42, December 2012, Pages 347–352