کد مقاله کد نشریه سال انتشار مقاله انگلیسی نسخه تمام متن
830541 1470356 2012 5 صفحه PDF دانلود رایگان
عنوان انگلیسی مقاله ISI
Additive Manufacturing for product improvement at Red Bull Technology
موضوعات مرتبط
مهندسی و علوم پایه سایر رشته های مهندسی مهندسی (عمومی)
پیش نمایش صفحه اول مقاله
Additive Manufacturing for product improvement at Red Bull Technology
چکیده انگلیسی

In Formula 1 racing, there is a strong motive for reducing component weight and thereby improving efficiency. This paper demonstrates the advantages Additive Manufacturing brings to the production of hydraulic components. The Direct Metal Laser Sintering (DMLS) production technique enables weight reductions to be attained by its geometric design freedom coupled with this material’s attributes. The use of EOS Titanium Ti64 material for hydraulic components has been assessed by a hydraulic soak test at 25 MPa and no significant losses or failure occurred. The benefits to the efficiency of hydraulic flow have been measured using Particle Image Velocimetry (PIV) and the use of DMLS manufactured geometry has improved flow characteristics by 250% over that of the currently used techniques of manufacturing channels and bores.


► Additive Manufacturing in a high value manufacturing application evaluated.
► Geometric design freedom produced flow passages with 250% velocity increase.
► Laser melted Ti64 flow passages with 0.5 mm wall validated for pneumatic manifolds.

ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Materials & Design - Volume 41, October 2012, Pages 226–230
نویسندگان
, , , ,