کد مقاله کد نشریه سال انتشار مقاله انگلیسی نسخه تمام متن
830799 1470360 2012 9 صفحه PDF دانلود رایگان
عنوان انگلیسی مقاله ISI
Influence of interface microstructure on the mechanical properties of titanium/17-4 PH stainless steel solid state diffusion bonded joints
موضوعات مرتبط
مهندسی و علوم پایه سایر رشته های مهندسی مهندسی (عمومی)
پیش نمایش صفحه اول مقاله
Influence of interface microstructure on the mechanical properties of titanium/17-4 PH stainless steel solid state diffusion bonded joints
چکیده انگلیسی

In the present study, titanium was diffusion bonded to a type 17-4 precipitation hardening stainless steel in vacuum at different temperatures and times. Bonded samples were characterized using light microscopy, scanning electron microscopy (SEM) and X-ray diffraction technique (XRD). The inter-diffusion of the chemical species across the diffusion interface was evaluated by electron probe microanalysis (EPMA). Up to 850 °C for 60 min, FeTi phase was formed at the diffusion interface; however, α-Fe + λ, χ, Fe2Ti and FeTi phases and their phase mixtures were formed above 850 °C for 60 min and at 900 °C for all bonding times. The maximum tensile strength of ∼342.4 MPa and shear strength of ∼260.3 MPa along with 12.8% elongation were obtained for the diffusion couple processed at 950 °C. The thicknesses of different reaction products at the bond interface play an important role in determining the mechanical properties of the joints. The residual stress of the bonded joints increases with the increases in bonding temperatures and times.


► Commercially pure titanium and precipitation hardening stainless steel was solid state diffusion bonded.
► Variation of temperatures and time at constant pressure were done to achieve maximum strength properties.
► Interface microstructure with mechanical properties was co-related.

ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Materials & Design - Volume 37, May 2012, Pages 560–568
نویسندگان
, , , , ,