Flow stress behavior of commercial pure titanium sheet during warm tensile deformation

The flow stress behavior of commercial pure titanium (CP-Ti) sheet was studied by uniaxial warn tension tests at temperatures ranging from 623 K to 773 K and strain rates from 5.0 × 10−2 to 8.3 × 10−4 s−1. A mathematical model using an updated Fields–Backofen (FB) equation was established to describe the flow stress behavior of CP-Ti during warm tensile testing. The results show that the flow stress of CP-Ti is evidently affected by both deformation temperature and strain rate, i.e., the flow stress decreases with the decrease of strain rate and the increase of deformation temperature, and a typical characteristic of dynamic recrystallization softening.The flow stress curves analyzed by FB equation shows good agreement with experimental flow curves for different temperatures and strain rates for CP-Ti sheet.

► The flow stress behavior of commercial pure titanium (CP-Ti) alloy sheet is discussed.
► The warm tensile deformation at different temperatures and strain rates was studied.
► The Fields–Backofen Model was introduced to simulate the flow stress evolution.