An investigation to the microstructural evolution of Fe–29Mn–5Al dual-phase twinning-induced plasticity steel through annealing

The potential effects of twinning induced plasticity have been taken into consideration to further improve the mechanical properties of advanced high-strength steels. Accordingly the high-Mn twinning-induced plasticity (TWIP) steels with austenite–ferrite dual-phase microstructure have been developed. In the present study, the influence of cold rolling and post-annealing treatments on the microstructural evolution and mechanical behavior of a group of dual-phase TWIP steel as a function of annealing time have been investigated. The mechanical behavior of processed materials has been examined through applying a set of low strain rate (0.001 s−1) compression tests at room temperature. The austenite recrystallization characteristics during various annealing conditions are explained through proper microstructural examinations. The results indicate that as the recrystallization proceeds with annealing time the related yield stress deceases. The rapid drop of yield stress in short annealing periods is related to the onset of recrystallization. The yield stress variation diminishes as the annealing duration increases. This is attributed to the formation of austenite side-plates which may balance the softening effects of restoration processes.

► A new type of TWIP steel with dual-phase structure is characterized.
► There is no significant decrease in yield stress with annealing time after 15 min.
► Occurrence of BCC to FCC transformation in ferrite through annealing.