کد مقاله کد نشریه سال انتشار مقاله انگلیسی نسخه تمام متن
831905 908112 2010 5 صفحه PDF دانلود رایگان
عنوان انگلیسی مقاله ISI
Mechanical properties of tri-modal Al matrix composites reinforced by nano- and submicron-sized Al2O3 particulates developed by wet attrition milling and hot extrusion
موضوعات مرتبط
مهندسی و علوم پایه سایر رشته های مهندسی مهندسی (عمومی)
پیش نمایش صفحه اول مقاله
Mechanical properties of tri-modal Al matrix composites reinforced by nano- and submicron-sized Al2O3 particulates developed by wet attrition milling and hot extrusion
چکیده انگلیسی

Among all metal matrix composites, aluminum is the most widely used matrix due to its low density coupled with high stiffness. In this study, aluminum matrix composites reinforced by two sizes of alumina particles (35 nm and 0.3 μm) are prepared by wet attrition milling and hot forward extrusion processes. The effect of the ratio of the nano- to submicron-sized particles (2:8, 3:7, 4:6, 5:5, and 6:4 in weight percent) on mechanical properties of the composites is evaluated by micro-hardness and tensile tests. It is found that by increasing the nanoparticles content, the hardness and strength of the composites first increase and then decrease when the amount of the nanoparticle exceeds 4 wt.%. The tensile fracture surfaces are also observed by scanning electron microscopy.

ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Materials & Design - Volume 31, Issue 8, September 2010, Pages 3880–3884
نویسندگان
, , ,