کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
832072 | 908115 | 2010 | 5 صفحه PDF | دانلود رایگان |
It is well known that the continuing quest for Al–Cu alloy with improved casting defects is driven by the need in aerospace industries. Especially, the wide crystallization range of Al–5 wt.% Cu based alloys results in generation of hot-tearing. In Al–5 wt.% Cu alloy, the hot-tearing susceptibility is influenced by the larger crystallization range, the quantity and distribution of the eutectic microstructure in the grain boundary and the size of primary α (Al) particles. The effect of Y content on the hot-tearing resistance in Al–5 wt.% Cu based alloys was studied by ZQS-2000 twin Bar Tester of Thermo-Cracking-Linear Contraction Tester. The hot-tearing behavior was studied by thermal analysis, optical microscopy (OM) and scanning electron microscopy (SEM). It was found that Y promoted the end-solidification temperature and decreased the quantity of eutectic in grain boundary. Y-rich phase precipitation caused a depression of the begin-solidifying temperature of α (Al), narrowed the crystallization range, increased the hot-tearing resistance and decreased the hot-tearing susceptibility significantly.
Journal: Materials & Design (1980-2015) - Volume 31, Issue 5, May 2010, Pages 2483–2487