کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
832373 | 908119 | 2010 | 5 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Feasibility study on the Laser Aided Additive Manufacturing of die inserts for liquid forging
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
موضوعات مرتبط
مهندسی و علوم پایه
سایر رشته های مهندسی
مهندسی (عمومی)
پیش نمایش صفحه اول مقاله
چکیده انگلیسی
This paper reports the Laser Aided Additive Manufacturing of nickel-base alloy Nimonic 80A for the purpose of direct building of die inserts for liquid forging. Low porosity level of 0.01–0.04% with reasonable deposition rate was achieved. The micro-hardness showed very good homogeneity. Directionally solidified cellular micro-structure with an average size of 5 μm was observed. Very fine MC-type carbides were detected at the grain boundaries, which function as the strengthening phase of the alloy.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Materials & Design - Volume 31, Supplement 1, June 2010, Pages S112–S116
Journal: Materials & Design - Volume 31, Supplement 1, June 2010, Pages S112–S116
نویسندگان
Guijun Bi, Gary Ka Lai Ng, Kim Ming Teh, Anders E.W. Jarfors,