کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
832647 | 908123 | 2009 | 9 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Evaluation on the suitability of some adhesives for laminated veneer lumber from oil palm trunks
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
موضوعات مرتبط
مهندسی و علوم پایه
سایر رشته های مهندسی
مهندسی (عمومی)
پیش نمایش صفحه اول مقاله
چکیده انگلیسی
Laminated veneer lumbers from oil palm trunk were manufactured using urea formaldehyde, phenol formaldehyde, melamine urea formaldehyde, and phenol resorcinol formaldehyde adhesives. The density of the oil palm laminated veneer lumber was slightly higher than the solid oil palm trunk. The thickness swelling and water absorption of laminated veneer lumber of oil palm were higher than those made from rubberwood. Laminated veneer lumber bonded with phenol resorcinol formaldehyde showed higher shear strength compared to other adhesives. The contact angle on the loose surface was lower than on the tight surface. Phenol formaldehyde adhesive has a higher contact angle compared to the other adhesives.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Materials & Design - Volume 30, Issue 9, October 2009, Pages 3572–3580
Journal: Materials & Design - Volume 30, Issue 9, October 2009, Pages 3572–3580
نویسندگان
O. Sulaiman, N. Salim, R. Hashim, L.H.M. Yusof, W. Razak, N.Y.M. Yunus, W.S. Hashim, M.H. Azmy,