کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
832976 | 908128 | 2009 | 6 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
The effect of material type and plate thickness on drilling time of abrasive water jet drilling process
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
موضوعات مرتبط
مهندسی و علوم پایه
سایر رشته های مهندسی
مهندسی (عمومی)
پیش نمایش صفحه اول مقاله
چکیده انگلیسی
Abrasive water jet processing is being developed in relation to the developments in engineering materials science. In this study, brass-353 (α + β brass), 99% pure aluminum, Al-6061 aluminum alloy, AISI 304, AISI 1030 and cold working tool steel (D3) materials were drilled with AWJ. The effects of thickness and material type on the drilling time were investigated and discussed. Hardness of the base materials and the drilled surfaces were measured and assessed. Results of the hardness test showed that there is not much difference between the drilled surface and the base material hardness. Micro photographs taken from the drilling surfaces show that drilling does not affect the micro structure and mechanical properties of the material.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Materials & Design - Volume 30, Issue 3, March 2009, Pages 810–815
Journal: Materials & Design - Volume 30, Issue 3, March 2009, Pages 810–815
نویسندگان
Adnan Akkurt,