کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
833105 | 908131 | 2009 | 5 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Microstructure of high temperature Ti-based brazing alloys and wettability on SiC ceramic
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
موضوعات مرتبط
مهندسی و علوم پایه
سایر رشته های مهندسی
مهندسی (عمومی)
پیش نمایش صفحه اول مقاله
چکیده انگلیسی
Ti-based brazing alloys were prepared by the non-consumable arc-melting technology. The wettability behavior of the brazing alloys on silicon carbide (SiC) was investigated by means of sessile drop method in vacuum at 1400 °C for 10 min. The brazing alloys of 91.5Ti–8.5Si (wt.%), 87.1Ti–8.1Si–4.8Cu (wt.%) and 83.2Ti–7.7Si–9.1Cu (wt.%) exhibit good wettability on SiC plate, but bad cohesion with SiC after cooling. However, the brazing alloys of 22Ti–78Si (wt.%) and 21Ti–74.2Si–4.8Cu (wt.%) exhibit both good wettability and cohesion with SiC after cooling. Microstructure, phase composition of the brazing alloys and the interface between the brazing alloys and SiC were investigated by using SEM coupled with EDS and XRD, respectively.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Materials & Design - Volume 30, Issue 2, February 2009, Pages 275–279
Journal: Materials & Design - Volume 30, Issue 2, February 2009, Pages 275–279
نویسندگان
Jiake Li, Lei Liu, Yating Wu, Zhibin Li, Wenlong Zhang, Wenbin Hu,