کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
833150 | 908132 | 2008 | 5 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Microstructure and mechanical properties of Cu–10%Al–4%Fe alloy produced by equal channel angular extrusion
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
موضوعات مرتبط
مهندسی و علوم پایه
سایر رشته های مهندسی
مهندسی (عمومی)
پیش نمایش صفحه اول مقاله
چکیده انگلیسی
A commercial aluminum bronze alloy (Cu–10%Al–4%Fe) produced by hot-rolling was subjected to equal channel angular extrusion (ECAE) process at 550 °C, 600 °C and 650 °C, respectively. The effects of ECAE on microstructure, phase transformation behavior and mechanical properties of the alloy were investigated. The results showed that the extrusion temperature must be higher than the eutectoid reaction temperature of the alloy. The grain size of alloy gradually reduced with the increase of the pass number of ECAE, and the mechanical properties were significantly improved after ECAE. In addition, phase transformation temperature of the alloy can be reduced by ECAE process.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Materials & Design - Volume 29, Issue 4, 2008, Pages 904–908
Journal: Materials & Design - Volume 29, Issue 4, 2008, Pages 904–908
نویسندگان
Leilei Gao, Xianhua Cheng,