کد مقاله کد نشریه سال انتشار مقاله انگلیسی نسخه تمام متن
833551 908146 2007 4 صفحه PDF دانلود رایگان
عنوان انگلیسی مقاله ISI
Sintering of polycrystalline diamond cutting tools
کلمات کلیدی
موضوعات مرتبط
مهندسی و علوم پایه سایر رشته های مهندسی مهندسی (عمومی)
پیش نمایش صفحه اول مقاله
Sintering of polycrystalline diamond cutting tools
چکیده انگلیسی

In this study, pressure-sintering experiments during direct sintering of diamond cutting tools has been conducted at 730 °C for 3–15 min with a pressure of around 350 MPa. For the matrix, the elements cobalt and nickel are used as the bonding phase and the α-bronze is used as the filling phase in various amounts. In microstructural characterization studies, various microstructural analyses were performed using the techniques of light microscopy, scanning electron microscopy (SEM), energy-disperse X-ray spectrography and image analysis.

ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Materials & Design - Volume 28, Issue 3, 2007, Pages 1055–1058
نویسندگان
, ,