کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
833702 | 1470371 | 2006 | 6 صفحه PDF | دانلود رایگان |
Nine non-metallic friction material formulations contained fibers, fillers and binder without strong abrasives were designed using Golden Section sequence combined with least-square method. Seven ingredients used without strong abrasives were selected based on the combinatorial approach. Wear (w) and coefficient of friction (μ ) are expressed as a function of volume fraction of the ingredients selected as w=k0V1k1V2k2…Vpkp and μ=m0V1m1V2m2…Vpmp. The formulations were optimized using the sensitivity series obtained from least-square method. An optimized formulation (S-10) was obtained with a total wear loss of 6.69 wt% and an average μ of 0.375. Friction surface of both brake pad and disc was observed using SEM, EDX and XRD. The non-metallic friction materials without abrasives exhibit unique friction performance and phenomena compared with the non-metallic friction materials with abrasives and semi-metallic brake linings. The temperature measured during friction is lower and the oxidation of the cast iron disc is not rigorous.
Journal: Materials & Design - Volume 27, Issue 10, 2006, Pages 833–838