Research and Improvement on structure stability and corrosion resistance of nickel-base superalloy INCONEL alloy 740

INCONEL alloy 740 is a newly developed Ni–Cr–Co–Mo–Nb–Ti–Al superalloy in the application to ultra-supercritical boilers with steam temperatures up to 700 °C. By means of scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-ray diffraction (XRD), micro-chemical phase analyses, and corrosion-resisting test, this paper investigates the structure stability of the alloy at elevated temperature and concentrates on coal ash corrosion performance of the alloy under the simulated coal ash/flue gas condition. Experimental results show that the most important structure instabilities of the alloy during prolonged aging are γ′ coarsening, γ′ to η transformation and G phase formation at grain boundary. The performance of corrosion resistance of the alloy would meet the requirement of ultra-supercritical boiler tubes. The phase computation by means of Thermo-Calc has been adopted in chemical composition modification for structure stability improvement. Two suggested new modified alloys in adjustment of the Al and Ti contents and in control of Si level, and also in maintenance of Cr content of the alloy were designed and melted for experimental investigation. These two modified alloys exhibit more stable microstructure during 760 °C long time aging.