Electrostatic ignition hazards in the process industry

Fires and explosions continue to be triggered by the accumulation of electrostatic charge in different branches of the process industry. This is the case even though nowadays the electrostatic phenomena that give rise to ignition hazards in industrial practice are generally well known. This paper presents various reasons as to why this should be so and draws attention to the conflicts of interest, which arise, when other requirements need to be met. In addition, current trends and new results with respect to the assessment of electrostatic ignition hazards are reviewed. They include (i) incendivity and characterisation of discharges from insulating surfaces with and without contact to a conductive surface, (ii) incidents affecting the present assessment of occurrence and incendivity of propagating brush discharges in practice and (iii) characterisation, measurement method and ignition hazard assessment of modern packaging systems such as flexible and rigid intermediate bulk containers (FIBC and RIBC). Finally, the consequences of Directives issued at the European and national levels are appraised with respect to electrostatic ignition hazards.