کد مقاله کد نشریه سال انتشار مقاله انگلیسی نسخه تمام متن
9706114 1465103 2005 21 صفحه PDF دانلود رایگان
عنوان انگلیسی مقاله ISI
A constitutive model for transversely isotropic foams, and its application to the indentation of balsa wood
موضوعات مرتبط
مهندسی و علوم پایه سایر رشته های مهندسی مهندسی مکانیک
پیش نمایش صفحه اول مقاله
A constitutive model for transversely isotropic foams, and its application to the indentation of balsa wood
چکیده انگلیسی
An elastic-plastic constitutive model for transversely isotropic compressible solids (foams) has been developed. A quadratic yield surface with four parameters and one hardening function is proposed. Associated plastic flow is assumed and the yield surface evolves in a self-similar manner calibrated by the uniaxial compressive (or tensile) response of the cellular solid in the axial direction. All material constants in the model (elastic and plastic) can be determined from a combination of a total of four uniaxial and shear tests. The model is used to predict the indentation response of balsa wood to a conical indenter. For the three cone angles considered in this study, very good agreement is found between the experimental measurements and the finite element (FE) predictions of the transversely isotropic cellular solid model. On the other hand, an isotropic foam model is shown to be inadequate to capture the indentation response.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: International Journal of Mechanical Sciences - Volume 47, Issues 4–5, April–May 2005, Pages 666-686
نویسندگان
, , , ,