کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
9707225 | 1465721 | 2005 | 12 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Forming limit comparisons for FCC and BCC sheets
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
موضوعات مرتبط
مهندسی و علوم پایه
سایر رشته های مهندسی
مهندسی مکانیک
پیش نمایش صفحه اول مقاله

چکیده انگلیسی
In this paper, numerical simulations of forming limit diagrams (FLDs) are performed based on a rate-sensitive polycrystal plasticity model together with the Marciniak-Kuczynski (M-K) approach. Sheet necking is initiated from an initial imperfection in terms of a narrow band. The deformations inside and outside the band are assumed to be homogeneous, and conditions of compatibility and equilibrium are enforced across the band interfaces. Thus, the polycrystal model need only be applied to two polycrystal aggregates, one inside and one outside the band. Both FCC and BCC crystals are considered with 12 distinct slip systems for an FCC crystal and 24 distinct slip systems for a BCC crystal. The response of an aggregate comprised of many grains is based on an elastic-viscoplastic Taylor-type polycrystal model. With this formulation, the effects of initial imperfection intensity and orientation, crystal elasticity, strain-rate sensitivity, single slip hardening, and latent hardening on the FLD can be assessed. Identical initial textures are considered for both FCC and BCC polycrystals and the predicted FLDs are compared with each other.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: International Journal of Plasticity - Volume 21, Issue 6, June 2005, Pages 1255-1266
Journal: International Journal of Plasticity - Volume 21, Issue 6, June 2005, Pages 1255-1266
نویسندگان
K. Inal, K.W. Neale, A. Aboutajeddine,