کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
9707664 | 1466168 | 2005 | 10 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Integrity assessment of a 3D tubeplate using the linear matching method. Part 2: Creep relaxation and reverse plasticity
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
موضوعات مرتبط
مهندسی و علوم پایه
سایر رشته های مهندسی
مهندسی مکانیک
پیش نمایش صفحه اول مقاله
چکیده انگلیسی
In an accompanying paper [Int J Pres Ves Pip, 2004], a 3D tubeplate in a typical AGR superheater header was analysed for the shakedown limit, reverse plasticity and ratchet limit based on the application of the linear matching method (LMM). Both the perfectly plastic model and the cyclic hardening model were adopted for the evaluation of the plastic strain range. In the present paper, based on the creep-reverse plasticity model, the accumulated creep strain during a creep dwell at the steady cyclic state is assessed by the LMM. The accumulated creep strains, the creep flow stresses as well as the elastic follow-up factors with differing dwell times are evaluated in detail. The total inelastic strain over the cycle at the steady cyclic state is calculated. By comparing these results with ABAQUS step-by-step inelastic analyses, the applicability of the methods is demonstrated.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: International Journal of Pressure Vessels and Piping - Volume 82, Issue 2, February 2005, Pages 95-104
Journal: International Journal of Pressure Vessels and Piping - Volume 82, Issue 2, February 2005, Pages 95-104
نویسندگان
H.F. Chen, Alan R.S. Ponter,